Build a Model Boat For Speed!

                        Zoom series model boat speed sequence.

Build a Model Boat Zoom1

Portsmouth Zoom 1 racing:

Click here for Zoom hull enquiries.

Zoom1 is a light fibreglass moulding model boat hull - 620 mm x 185 mm x 80mm high at stern – medium V.

It is an unstepped design, more stable in rough water & is slightly bigger that the other Zooms - so has a more headroom inside.

The hull & deck are bonded together and the hatchway cut out. The transom, chines & rails are reinforced with extra glass strands.

Ideal for fun boating and Mono 1 racing (2s - 3s lipo) or 12 NiMh - surface drive.

It comes with a new design moulded canopy/hatch which makes the boat self righting if you put the battery on the left side - no need for a flood chamber.

All Zooms available in all white or white hull with red, yellow, orange, purple or blue deck.

See Fittings Details

       Build a Model Boat Zoom2


Click here for Zoom hull enquiries.

Zoom2

This is a light fibreglass moulding - 600mm x 170 mm x 60mm high at the stern - medium V.

The hull & deck are bonded together and the hatchway cut out. It has a reinforced transom and extra glass strands in the rails & chines.

Ideal for fun boating and Mono 1 racing (2s or 3s lipo) and 7 cell Nimh. This is a no-step design for better handling in rough water - it goes where you point it.

New style offset hatch/canopy included - so the boat will self right with the battery on the left.

See Fittings Details

    Build a Model Boat Zoom3

Click here for Zoom hull enquiries.

Zoom 3 Is the new stepped version of the successful Zoom 2 - a light fibreglass moulding - 600mm x 170mm x 55mm high at the stern - medium V.

It has a reinforced transom & extra glass strands in the rails & chines.

The hull & deck are bonded together and the hatchway cut out. This one has rails under the aft section of the hull which make it run flatter than Zoom 4.

Ideal for fun boating and Mono 1 racing (2s or 3s  lipo).

New style offset hatch/canopy included - so the boat will self right with the cells on the left.

See Fittings Details

    Build a Model Boat Zoom4

Zoom 4 Eaton Pond, Norwich

Click here for Zoom hull enquiries.

Zoom 4 is the latest addition to the successful Zoom family - a light fibreglass moulding - 600mm x 170mm x 55mm high at the stern - medium V.

It has a reinforced transom and extra glass strands in the rails and chines for strength.

The hull & deck are bonded together and the hatchway cut out.

Ideal for fun boating and mono 1 racing (2s or 3s  lipo).

New style offset hatch/canopy included.

With 7 NiMh cells or 3s lipo the boat will self right. With 2s lipo it needs some weight on the left side.

See Fittings Details

Build a Model Boat RC Zoom

Click here for Zoom hull enquiries.

You might like these

Build a Model Boat > BuildTu Home

All Information on this website is provided for educational purposes only. Please seek expert advice for your building project.

Copyright © 2020 - BuildTu.com